Seiko SNZH57 Dagaz "Fifty Five Fathoms"
Two years ago, I bought an Anstead
Oceanis. This was one of the first micros to make a real go of it on
Kickstarter, and a damn nice watch (you can read a Guest Bum review here),
but there was just one thing wrong. You see, the Seiko NH35 movement
inside had a misprinted day wheel. This was not unique to my watch, or
even to Anstead. Every disc in that particular NH35 production run had
the same flaw. The day dipped a tiny bit down the right, most noticeably
on Thursday and Friday. It was just enough to be maddening. When I
raised my concern with Tom Anstead, he offered a full refund, but I
declined. In the end, I liked the watch too much to let it go. So I
cooked up a plan B. With the help of Jake Bourdeau at Dagaz Watches, I learned
the disks in the NH35 were interchangeable with that of the more common
Seiko 7s36. The easiest way to get my hands on one was to buy a Seiko 5
and pull it out, but what to do with that poor Seiko? I couldn't just
leave it that way. I'd have to find the right watch, take what I needed,
and improve what was left behind.
My donor was an SNZH57, which is a
very pretty watch in its own right. It is 42mm wide and 14mm thick with a
22mm bracelet, domed Hardex crystal, sword hands, and a display case
back. The case sides are rounded and polished while the top is brushed.
The 120-click bezel is a standout feature, with its markers set deep
beneath an acrylic insert, and toothy, polished edge. I'd describe the
watch as more of a dress-diver or diver-style watch, than a serious
diving instrument. It has the right look, but only 100m water
resistance, the crown does not screw down, and the bezel action is a bit
too loose for me trust with my oxygen consumption. Not that any of this
matters, mind you. Once my Seiko gave up its spare parts, it was going
to be a strict surface-dweller.
With both watches and my new dial in
hand, it was time to get to work, and by that I mean it was time for
someone else to get to work. Not me, of course. I'm an idiot when it
comes to watch repair. I brought them all to my local watchmaker and
explained the projects. Most of his customers don't ask him to swap
parts between two perfectly good, brand-new watches, but he was willing
to oblige and didn't charge me any more than he would for a basic
service. In short: pop open the Seiko, remove the movement hands, dial,
and day/date wheels, install the new dial, replace hands, and reinstall
the whole works back into the case. There is no need to put any date
discs back, the watch runs fine without them. The end result? Lovely,
with spare discs for my Anstead.
To most watch owners, this project
must seem a little bit nuts. After all, the Anstead was not terribly
flawed, and the SNZH57 was perfectly nice as it was, but that isn't
really the point is it? The Anstead could be improved, the parts had to
come from another watch, and that watch would be left dateless. Really
now, I had no choice, and I did not have spend much to do it. I paid
$150 for the watch, $34 for the dial, about $100 for the labor. If you
care to count the Bradystrap it is just an additional $35. Hardly a
princely sum, and it even holds its value. I've seen used FFF mods go
for about $250-350 on Watchuseek. If you have an old Seiko that needs
new life, or even if you don't, head over to DagazWatches.com and browse
the options. You might just be inspired but even if you are not ready
to take on a modding project,
the Seiko SNZF series is an excellent choice. It is inexpensive,
attractive, and suitable for everyday wear. It looks fantastic as an
FFF, but you don't need to change much to have an enjoyable, reliable
watch for a song. Just swap the bracelet for a strap and you're good to go.
mehr sehen Kopieren rolex und
bell & ross br01-92
没有评论:
发表评论